Truck & Bus
Back to
Truck & Bus
We are a supplier to all the significant vehicle manufacturers worldwide, whether our contribution is an individual, standard engine seal or a component system developed to meet a particular requirement. You always receive parts at the highest level as well as comprehensive expertise. Along with longevity, efficiency and TCO, the relevant issues for commercial vehicles are the varying requirements across regions – especially when compared to passenger cars – and exhaust gas after-treatment to reduce nitrogen oxides (SCR). Furthermore, our customers have direct access to a wide-ranging network of global research and development facilities, an extensive assortment of materials, technical experts and manufacturing specialists. In cooperation with our OEM customers, the Freudenberg Sealing Technologies (FST) Automotive team is ready to assist you with the implementation – even when your requirements are unique.
Fuel Cell Electric Vehicle
Click on the image for a more detailed view.
Battery Electric Vehicle
Click on the image for a more detailed view.
E-Powertrain Components in Electric Trucks
Components in Which We Make Parts
The electrification of mobility is driving change in the powertrain and increasing the use of power electronics. FST is poised to provide products that foster the increase of greater power densities through our thermal management materials and electro management interference (EMI) solutions. And as expectations of reliability continue to extend, so do our solutions to support it. Whether it is products that are electrically grounding or regulate a desired pressure in the system, FST has it.
As far as the drastically increasing shaft rotation speeds, we have options as well. Levitex and other low friction simmerrings. Our goal is to improve our customers’ systems’ efficiency. And as always, when fitting to innovate together.
-
Wiring Harnesses
Bellows
Allow for the flexible and sealed feedthrough of cables and fluid lines.
Overmolded Bus Bars
Rubber overmold of bus bars for sealing purposes.
Topographic 3D Thermal Interface Material (TIM)
The embedding and protection of heat sources is our goal here. Our materials are thermally conductive, but more than just that, we are capable of producing 3D topographic structures that address the complex thermomechanical interactions with such applications. They are designed to improve the thermal management of the circuit boards by thermally connecting it to the electronic housing.
-
Thermal Management
Topographic 3D Thermal Interface Material (TIM)
The embedding and protection of heat sources is our goal here. Our materials are thermally conductive, but more than just that, we are able to produce 3D topographic structures that address the complex thermomechanical interactions with such applications.
Cooling Connectors (Plugs and Seals With and Without Sensors)
Our well-established plugs and seals are the perfect interconnection in cooling systems. Compared to competitive solutions, they are extremely resistant against vibration and offer excellent tolerance compensation. Furthermore, when an application requires it, sensing functions can be incorporated into this solution to offer even greater value.
Sealing Covers (The Ends of Hollow Shafts)
Hollow shaft sealing covers.
Cooling Cycle Tubes (And Flexible Materials)
Our cooling cycle tubes offer freedom of design via ”customized” tubes for complex geometries. Flow resistance is greatly reduced due to the smooth inner surface of the tubes. Soft connectors can be integrated to improve NVH behavior. Integration of additional functions is also possible. Lastly, our parts are not susceptible to corrosion and offer higher tolerance due to the flexible nature of the product.
Power Module Cooling Seals
D-rings, o-rings, gaskets, etc. We offer many different designs for use in this application. Furthermore, we have a standard off the shelf o-ring that is specially designed and formulated for this application.
Plastic Cooling Jacket With Integrated Sealing
Please contact us for more information.
Large Static Seals
Thermally Conductive Plastics & Elastomers
Please contact us for more information.
Bobbins
Our thermally conductive plastics are a great solution for e-motor bobbins. Direct contact with the e-motor wires results in more efficient thermal propagation.
-
Housing and EMI Shielding
Sealing Covers
Please contact us for more information.
Gaskets
Should your application require it, our edge-bonded gaskets now have the material capabilities to act as EMI shielding.
Plastic Cooling Jackets With Integrated Sealing
Please contact us for more information.
DIAvent® Light
Similar to our DIAvent®, DIAvent® Light also provides pressure regulation during normal operation with extremely high gas permeation.
eCON Electrically Conductive Non-Wovens
This non-woven solution can support the shielding of the overall system in order to minimize radio noise or faulty data transmission of the BUS system.
EMI Shielding Plastic Housings and Covers
Our plastic housings and covers can be designed with adjustable EMI shielding performance and thus provide up to 40% reduction in weight. In addition, further integration is also possible via seals, gap fillers and breathing elements.
-
Pressure Regulation
DIAvent® Light
Similar to our DIAvent®, DIAvent® Light also provides pressure regulation during normal operation with extremely high gas permeation.
-
High Speed Shafts
Low Friction Simmerrings
Please contact us for more information.
Cassette Seals
Please contact us for more information.
Blue Seals
Please contact us for more information.
Energy-Saving Simmerings
Please contact us for more information.
eCON Electrically Conductive Non-Wovens
The electrically conductive non-woven material from Freudenberg can solve the problem of electrical bearing corrosion. It forms a conductive bridge between the housing and the shaft and thus prevents electrical erosion inside the drive unit.
In addition, the non-woven is able to support the shielding of the overall system in order to minimize radio noise or faulty data transmission of the BUS system.
-
Bearings
eCON Electrically Conductive Non-Wovens
The electrically conductive non-woven material from Freudenberg can solve the problem of electrical bearing corrosion. It forms a conductive bridge between the housing and the shaft and thus prevents electrical erosion inside the drive unit.
Thrust Washers
Our washers made of plastic greatly reduce weight and improve friction and thickness/flatness all without sacrificing the function provided by a conventional bearing solution. This solution reduces C02 emissions by 0.8g/km on average.
-
Shaft Grounding
eCON Electrically Conductive Non-Wovens
The electrically conductive non-woven material from Freudenberg can solve the problem of electrical bearing corrosion. It forms a conductive bridge between the housing and the shaft and thus prevents electrical erosion inside the drive unit.
In addition, the non-woven is able to support the shielding of the overall system in order to minimize radio noise or faulty data transmission of the BUS system.
As an additional integration, our simmerrings, such as our LFS and soon to be ESS and Levitex, can be used in combination.
-
Speed Sensing
Applications in Which We Make Parts
Safe Grounding
Use eCON to Avoid Bearing Damage in Electric Motors.
Learn more about Grounding Solutions
Back to Top